Home > Video Accessories > DJI > DJI Ronin-M 3-Axis Gimbal Kit (Without Monitor)

DJI Ronin-M 3-Axis Gimbal Kit (Without Monitor)

Note: Comes with an assistant which will cost extra depending on the call sheet charges. The Ronin-M 3-Axis Gimbal Kit. Advanced motorized camera stabilization with an effective way to see the image from the camera while mounted on the gimbal. The Ronin-M is designed to give the operator close to the freedom of unencumbered handheld shooting but without the hand-shake. Suitable for most camera types and configurations up to 8 pounds, the Ronin-M uses brushless motors that work on three axes: one for side-to-side "roll" - keeping the horizon level - one for tilt, and one for pan. While it can be used solo, it benefits from a second operator who can control camera movement while letting the gimbal operator concentrate on keeping the Ronin-M aimed in the right general direction while not tripping over obstacles. The included monitor can be mounted on the gimbal handle, so the gimbal operator has a way to judge framing, adjusting his or her stance as needed.

No. of Days Per Day Rates
1+ 3500 INR
3+ 3250 INR
6+ 3000 INR
10+ 2750 INR
14+ 2500 INR
17+ * Contact Us

Performance Load Weight (Reference Value) 8 lb / 3.6 kg Angular Vibration Range ±0.02° Maximum Controlled Rotation Speed Pan Axis: 90°/s Tilt Axis: 100°/s Roll Axis: 30°/s Mechanical Endpoint Range Pan Axis Control: 360°/s Tilt Axis Control: +105° /-165°/s Roll Axis Control: ± 110°/s Controlled Rotation Range Pan Axis Control: 360°/s Tilt Axis Control: +105° /-165°/s Roll Axis Control: ± 25°/s Electrical and Mechanical Motor Type 3 x Brushless Working Current Static Current: 300 mA (at 16 VDC) Dynamic Current: 600 mA (at 16 VDC) Locked Motor Current: 10 A maximum (at 16 VDC) Sensors Independent IMU module Temperature sensor Processing 32-bit DSP processor Receiver Frequency 2.4 GHz Expandability D-Bus receiver supported Connectivity Wireless 2.4 GHz for transmitter (remote controller) Bluetooth 4.0 Wired 2 x 12 VDC regulated PowerTap 1 x USB power output (500 mW) 1 x DJI Lightbridge interface System Requirements Assistant Software Desktop: Windows (32- or 64-bit): 8, 7, XP SP3 Mac OS X: 10.9 or above Mobile: iOS 7.0 or later General Control Modes Underslung Mode Upright Mode Briefcase Mode Supported Camera Dimensions Maximum depth at center of mass on camera base plate: 4.7" / 120 mm Maximum height measured from top of camera base plate: 7.7" / 195 mm Maximum width: 6.3" / 160 mm Power Requirements 4S Ronin-M Battery Operating Temperature -5 to 122°F / -15 to 50°C Dimensions (W x D x H) 19.7 x 8.3 x 16.5" / 500 x 210 x 420 mm Weight 5.07 lb / 2.3 kg (fully loaded with handlebar) Packaging Info Package Weight 15.0 lb Box Dimensions (LxWxH) 18.8 x 12.5 x 11.5"